"Banging on a 2900"
Work Session Status Week Ending 10/19/2013
October 22, 2013
After taking two weeks off for R & R Gail and I returned to the restoration site this past Wednesday. Thanks to Bob D. for
filling in during my absence as assistant CMO.
Work continues on the flexible staybolt sleeves both removing wasted ones and welding on new ones. We are currently
removing the larger size located up around the crown. The larger sleeves were designed to be longer than the small ones so
they can be customized to fit the curve of the firebox. Ron T. designed a jig to fit in the lathe. It is adjustable to
whatever angle the large sleeves have been cut enabling the weld area to be beveled in a matter of minutes. Thread chasing
of reusable sleeves continues on the underside of the boiler.
Final assembly of the trailing truck air brake cylinders continues. Two of them have been installed on the engineer's side.
More crud is being removed from the frame area under the cab. Workers continually uncover discarded rusty treasurers
encased in a hard oil/sand goop. Old pipe fittings, bolts and nuts are most common.
Work has begun organizing the myriad of electrical conduits, boxes and switch gear located in the cab. Many pieces have
already been cleaned and prepped for paint.
Saturday Dr. Mike and Jon held a New Member orientation inducting six more volunteers. Welcome aboard all of you.
November the 2nd has been chosen to present refresher classes on confined space work and rescue. This will not be repeated
anytime soon so please plan to attend. Instruction will begin at 9:00am.
Hope to see you at the site, and as always . . .
Keep on Steamin',
Rick Kirby, CMO