"Banging on a 2900"
Work Session Status Week Ending 08/01/2015
August 3, 2015
The never ending job of cleaning parts and painting continued this week. We are however close to the
end of that work.
The old foot boards have all been laid out and the necessary bolt holes have been identified. The
next step will be to transfer these locations to the replacement foot boards.
Work is ongoing pertaining to the broken stud bolts that require removal and replacement.
Sand dome repair work also continues as weld bevels were ground on both halves of the dome. A
protective coating was applied to the top half. Repair materials for the bottom half will be picked
The machine shop has been busy fabricating the stud bolts and brass test plugs.
Trailing truck air brake levers are being fitted with new bushings to fit the new pins.
Several of the long control rods for the bell and whistle were bent many years ago as various
individuals that climbed on and around the locomotive during its life in the park. Workers are
removing the bends so they will work properly.
Reassembly of the second dynamo began Saturday. All internal wiring has been rewound.
There will be a New Member orientation Saturday, August 15th beginning at 9:00 AM. The August
General meeting is this coming Saturday, August 8th at 7:30 AM. Please come early to help put out
The GoFundMe project for the Engine House/Garage has raised a little over $11,000 from 66 contributors
since its inception. Each month we average between 45 and 50 thousand visits to our website via all
sources of social media. We also have about 350 members. If we are to meet our goal to build a garage
for the locomotive we need participation from everyone who is interested in protecting this locomotive
from thieves and the elements. So please support this effort. You can go to our website at
www.2926.org to find more info about it.
There are other ways to support the restoration:
- Become a member
- Designate NM Steam Locomotive and Railroad Historical Society your charity at Smith's
(or its affiliates), Albertson's grocery stores and also Amazon Smile. Please go to
our website for details.
Hope to see everyone at the site this week, and as always . . .
Keep on Steamin',
Keep on Steamin',
Rick Kirby, CMO